Velleman-projects EDU10 Assembly instructions Instrukcja Użytkownika Pobierz pdf (Strona 6)

- UK -

p. 6

USB PIC PROGRAMMER AND TUTOR BOARD

Run the EDU10 Startup Demo

• Click on “On” check box in the panel “VDD PICkit 2” to turn the EDU10 power on.

• Use the “Up” arrow to adjust the voltage to 5V.

• Now the PIC16F882 on EDU10 should be running its default “Startup” program.

You can test the board by pressing buttons SW1..SW4

and RESET (SW5). There should be following response:

SW1:

- Turn on LD7

- Show ‘7’ on the 7-segment display.

SW2:

- Turn on LD6

- Show ‘6’ on the 7-segment display.

SW3:

- Turn on LD5

- Show ‘5’ on the 7-segment display.

SW4:

- Turn on LD4

- Sound is generated.

- Display all segments+dot on the 7-segment display.

RESET mode:

- LDR is programmed as light detector.

- LDR turns LED LD8 on/off depending on light.

- Potentiometer RV1 changes the display brightness.

- If NTC voltage <1V or >4V then “E” (Error) is displayed on the

7-segment display.

Running other demos

In the software package for the EDU10 there are several demos written in assembly and C.

You can use the PICkit 2 Programmer software to reprogram the PIC16F882 on the EDU10 board with the downloaded demo code.

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Brak uwag

Velleman-projects EDU10 Assembly instructions Instrukcja Użytkownika Strona 6